Chapter 2 - Placing Your Airstation; Antenna Placement; Installation; Connecting To Poe Equipment (Sold Separately) - Buffalo WAPS-APG600H User Manual

Chapter 2 - Placing Your AirStation

Antenna Placement

Remove the antenna caps and attach the antennas. Don't touch the conductive parts of the antenna
connectors because they can be damaged easily.
Note: These antennas support both 2.4 GHz and 5 GHz.

Installation

Connecting to PoE Equipment (Sold Separately)

If PoE (Power over Ethernet) is available on the network, you may not need to use the AC power
supply. Instead, connect LAN port 1 to an Ethernet connection with PoE as shown below. Do not
connect the AC power supply if you're using PoE.
Notes: · LAN port 2 does not support PoE. Don't connect PoE equipment to LAN port 2.
· You may supply power to the AirStation with PoE or the AC adapter. Do not connect both at once!
- 8 -