Lan (Connecting Through Nat) - Sony Ipela PCS-XG80 Operating Instructions Manual

To connect to a remote party
Select "IP" under "Line I/F", enter the user name or user number set by the
remote party, and dial.

LAN (Connecting through NAT)

Connection using NAT allows one IP address to be shared by several
computers on the same LAN. This section describes how to set up visual
communication in NAT and global IP environments.
Configuration example
192.168.10.1
/
192.168.10.10
1
Enter a name in "Host Name" under the Basic Setup page in the LAN setup
menu, and enter the appropriate values for "IP Address", "Network Mask",
and "Gateway Address".
Setup > LAN > Basic Setup
2
Set "NAT Mode" to "On" in the NAT Setup page of the LAN setup menu,
and enter the appropriate IP address in "WAN IP Address".
84
Setting Up the Network Configurations
210.10.10.1
Internet
Router
IP:192.168.0.11
LAN1
Host Name
DHCP Mode
IP Address
Network Mask
Gateway Address
Primary DNS
Secondary DNS
LAN Mode
210.20.20.1
Router
/
210.20.20.2
(Global address)
5/11/2008 13:00
Sony
Off
192.100. 10. 10
255.255.255. 0
192.100. 10. 1
Auto
Save Cancel