Sony Ipela PCS-XG80 Operating Instructions Manual page 173

Hd visual communication system
Hide thumbs Also See for Ipela PCS-XG80:
Table of Contents

Advertisement

Rear
1
2 3
CAMERA
S VIDEO IN
RGB IN
EC-MIC(A7)
MIC(A1/A3)
1(R)
2(L)
1
2
R
L
R
(PLUG IN POWER)
AUDIO 1 IN
AUDIO OUT
8
9
0
qa
qs
a CAMERA connector
Connect to the TERMINAL connector
on the PCSA-CXG80 HD Camera Unit.
b S VIDEO IN connector (mini DIN
7-pin)
Connect to the S-video output on the
optional second camera or video
equipment.
c RGB IN connector (D-sub 15-pin)
Connect to the RGB output of the
optional computer or video equipment.
d RGB OUT connector (D-sub 15-
pin)
Connect to the RGB input of the
optional projector or display unit.
e HDMI OUT connector
Connect to the HDMI input of the
optional TV monitor.
f ISND UNIT connector
Connect to the TERMINAL connector
on the optional PCSA-B384S or PCSA-
B768S ISDN Unit.
g AUX CONTROL connector (D-sub
9-pin)
Used for maintenance service.
h
I
(ground) terminal
Connect a ground wire.
4
5 6 7
RGB OUT
HDMI OUT
ISDN UNIT
AUX CONTROL
L
R
L
DC 19.5V
REC OUT
1-EXT-2
1
2
qd
qf
qg
qh
i EC-MIC (A7) 1/2 (Echo canceling
microphone) jacks
Connect to optional PCSA-A7 echo
canceling microphones.
j MIC (A1/A3) 1 (R)/2 (L) jacks
(minijack)
Connect to the PCS-A1 microphones
(supplied with PCS-XG80) or PCSA-A3
microphones (optional). Power is
supplied to the microphones from the
System.
k AUDIO 1 IN L/R jacks (phono
jack)
Connect to the audio outputs of the
optional VCR or audio equipment.
l AUDIO OUT L/R jacks (phono
jack)
Connect to the audio inputs of the TV
monitor.
m REC OUT L/R connectors (phono
jack)
Used when recording the audio signals
to minute a communication. The mixed
sounds of the local and remote parties
are output from these connectors.
n EXT (external equipment) 1/2
connectors
Not used with the system of this version.
o
1 (100BASE-TX/10BASE-T)
connector (8-pin modular)
Used to conduct a communication via a
LAN or a SIP. Connect to a hub or a SIP
server using the category 5 cable.
Note
The
2 connector is not used with this
system. It will be used for a future
upgraded version of this system.
p DC 19.5V jack
Connect the supplied VGP-AC19V15
AC Power Adaptor.
Location and Function of Parts and Controls
173

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ipela pcs-xg80s

Table of Contents