Sony Ipela PCS-XG80 Operating Instructions Manual page 75

Recording
Select whether to enable the recording of
video and audio to a "Memory Stick."
Enabled: Permits the recording.
Disabled: Does not permit the recording.
Video
Select a bit rate for streaming and recording
video.
Off: Disables the streaming and recording of
video.
64Kbps: Streams and records video at
64 Kbps.
128Kbps: Streams and records video at
128 Kbps.
384Kbps: Streams and records video at
384 Kbps.
512Kbps: Streams and records video at
512 Kbps.
Note
When "Off" is selected, only audio can be
streamed and recorded.
Multicast Address
Enter the multicast address for streaming
broadcasts.
Audio Port Number
Enter the audio port number for streaming
broadcasts.
Video Port Number
Enter the video port number for streaming
broadcasts.
HOP
Enter a number from 0 to 255 as the HOP for
streaming broadcasts.
Administrator6
Access Permit
Web Access
Select whether to permit access to the
Communication System via a Web browser.
Enabled: Permits access via a Web browser.
Disabled: Prohibits access via a Web
browser.
Telnet Access
Select whether to permit access to the
Communication System via Telnet.
Enabled: Permits access via Telnet.
Disabled: Prohibits access via Telnet.
SSH Access
Allows you to select whether to permit
access to the Communication System via
SSH (Secure Shell).
Enabled: Permits access via SSH.
Disabled: Prohibits acces via SSH
Administrator7
Other
Use History
Select whether to display the history lists in
order to use for dialing, etc.
On: Displays the history lists.
Off: Does not display the history lists.
Save Setup
Saves the data for each setting to a "Memory
Stick". The data for each setting saved on the
"Memory Stick" is overwritten.
Note
Phone Book and History data are not saved.
Load Setup
Loads the data for each setting from a
"Memory Stick". The data for each setting
saved on the System is overwritten.
Note
When saving and loading settings, make sure
that the version of the system from which the
data was originally saved is the same as the
version of the local system. If the versions
differ, the data may not be properly recognized.
AMX Device Discovery
Select whether to export AMX Device
Discovery information onto the network.
Off: Disables this function.
On: Enables this function.
When the AMX system is connected to the
Communication System via serial
connection, AMX Device Discovery
information is output via that serial
connection.
AMX systems are external control devices
that can be used to control the
Communication System. When the AMX
system receives Device Discovery
Registering Local Information
75