Entering Numbers Using The On-Screen Keyboard - Sony Ipela PCS-XG80 Operating Instructions Manual

Entering Numbers Using the On-Screen Keyboard

This section explains how to enter the numbers in the text box in the menu
using the on-screen keyboard displayed on the monitor screen.
When "Display On-Screen Keyboard" is set to "On" in the Menu2 page of the
General setup menu (page 73), the on-screen keyboard automatically appears
on the screen if character input is required in the menu.
To enter numbers
1
Use the V, v, B or b button on the Remote Commander to select the
number button you want to enter, then press the ENTER button.
The selected number will be displayed on the screen.
2
Repeat step 1 to enter all the letters or numbers.
After the input is complete, select "End", then press the ENTER button on
the Remote Commander.
To enter a dot (.) for an IP address
Select the b button or Dot button, then press the ENTER button on the Remote
Commander.
To enter a space
Select "Space", then press the ENTER button on the Remote Commander.
To delete a character
To erase the last entered character, select "Back Space", then press the ENTER
button on the Remote Commander.
To delete all the characters entered
Select "Cancel", then press the ENTER button on the Remote Commander.
52
Using the Menus
Num 1 2
4 5
7 8
0
Space
End
3
Back
Space
6
9
Dot
Cancel