Lan (Connecting Through Nat) - Sony IPELA PCS-HG90 Operating Instructions Manual

To connect
Select "Single" under "Dial Mode", enter the user name or user number set by
the remote party, and dial.

LAN (Connecting through NAT)

Connection using NAT allows one IP address to be shared by several
computers on the same LAN. This section describes how to set up for a video
communication conducted in NAT and global IP environments.
Configuration example
192.168.10.1
192.168.10.10
1
Enter a name in "Host Name" under Page 1/2 of the General screen in the
LAN Setup menu, and enter the appropriate values for "IP Address",
"Network Mask", and "Gateway Address".
LAN Setup
General
Page:
2
Set "NAT Mode" (Page 1/2) to "On" in the NAT/Port screen of the LAN
Setup menu, and enter the appropriate IP address in "NAT Address".
LAN Setup
NAT/Port
Page:
The setting has been configured properly if the correct NAT address appears in
the launcher menu.
68
Setting Up the Network Configurations
Router
1/2
DHCP Mode Off
Host Name Sony
IP Address 192.100.10.10
225.225.225.0
Network Mask
Gateway Address 192.100.10.1
DNS Address . . .
Save
1/2
NAT Mode On
210.10.1.1
NAT Address
Save
Router
210.10.10.1
Internet
210.20.20.2
(Global address)
2005.12.28 12:34
Cancel
2005.12.28 12:34
Cancel
210.20.20.1