Sony Ipela PCS-XG80 Operating Instructions Manual page 91

2
Use the V, v, B or b button on the Remote Commander to select the line
interface to be used, then press the ENTER button.
IP: Select to connect to the system on the remote site via a LAN.
ISDN: Select to connect to the system on the remote site via an ISDN line.
TEL: Select to connect to a phone on the remote site via an ISDN line for
a voice meeting.
SIP: Select to connect to an IP phone via a SIP.
3
Use the V, v, B or b button on the Remote Commander to select the
number text box, then press the ENTER button.
4
Enter the remote party's IP address or line number with the number buttons
on the Remote Commander, then press the ENTER button.
Note
The format of the address for a SIP connection is the following:
• 4000 (number assigned by the SIP server)
• 4000@sip.com
• 192.168.1.1 (when the IP address and SIP server are not used)
5
Use the V, v, B or b button on the Remote Commander to select "Dial",
then press the ENTER button. Or press the CONNECT (
Remote Commander.
The system begins dialing the IP address or telephone number entered in
step 4. "Dialing" appears on the monitor screen.
When the system connects to the remote system, the message "Session
Connected" appears on the screen and the picture on the remote site is
displayed. Now you can start communication with the remote party.
To cancel dialing before connecting with the remote party
While "Dialing" is displayed on the monitor screen, press the ENTER
button or the DISCONNECT ( ) button on the Remote Commander.
Starting a Connection by Calling a Remote Party
) button on the
Picture on the local site
Picture on the remote site
91