Lan Line Status - Sony Ipela PCS-XG80 Operating Instructions Manual

Communication mode status
The items below are shown both in the
columns for "Encode" and "Decode". The
descriptions under "Encode" show the setting
status of the local system and those under
"Decode" show the status of the receiving.
Far End Terminal Name
Displays the terminal name of a remote
party.
Remote Address
Displays the address of a remote paty.
Audio Mode
Displays the current audio encoding format.
Video Mode
Displays the current video encoding format.
Note
The audio encoding and video encoding
formats used for communication with a remote
party may differ from the settings in this menu,
depending on the status of the system on the
remote site.
Frame Rate
Displays the maximum frame rate of motion
pictures.
Rate
Displays in real time the number of
connected lines and their transfer rates.
Line I/F
Displays the line interface being used.
Camera Control
Displays whether the unit is ready to operate
both cameras.
H239
Displays whether the unit is ready to use the
H.239 presentation mode.
Check Code
Displays the encryption check code.
80
Displaying the Machine Status

LAN Line Status

Bit rate - Encode
Displays by category (audio, video and
H.239 (presentation)) the transfer rates for
sending data.
Bit rate - Decode
Displays by category (audio, video and
H.239 (presentation)) the transfer rates for
receiving data.
Number of lost packets
Displays by category (audio, video and
H.239 (presentation)) the number of packets
lost during transfer on the network.
Number of recovered packets
Displays by category (audio, video and
H.239 (presentation)) the number of lost
packets that were recovered with the
system's QoS function.
Number of received packets
Displays by category (audio, video and
H.239 (presentation)) the number of packets
received during communication.