Table of Contents
Advertisement
8.
Searching and Pausing at the Beginning
of the Track ........................................................... Pause
(1)
With Direct Search
•
In this case, the set pauses at the beginning of the track found
with the direct search operation.
(2) With Program Search
• Press the button after the program search operation is completed.
The set will pause at the beginning of the first programmed track.
Changing the Speed of Playback ...................... Pitch Control
• Playback can be speeded up or slowed down.
(1) Press the PITCH + or PITCH - button during the play or pause
mode to change the speed of playback.
(2) When one of the PITCH buttons is pressed, the amount of the
speed change appears on the TIME display for approximately 2
seconds. The speed can be changed in steps of 0.1 % from
-12.0% to +12.0%.
12
(3) Press the PLAY button during playback with a
different speed to return to normal speed playback.
Also, the speed setting is cancelled if the stop mode is set during
playback at a different speed.
NOTES
• No data is output from the digital output jack (COAXIAL)
during playback with a different speed. If you want to
output data, press the PLAY button to return to normal
speed playback.
• The pitch also changes when the speed is changed.
• The time display (elapsed playback time, remaining time per
track, or total remaining time) will not be accurate during
playback with a different speed.
• A maximum of 1 second is required to return to the normal
speed when the PLAY button is pressed during playback
with a different speed. During this time, only the
OPEN/CLOSE and STOP buttons will function.
1. Start playback and press the A-B button when you reach the
starting point of the interval. The A-B indicator starts blinking.
2. Continue playback or advance the pickup using the Automatic
search forward button or manual search forward button until the
ending point is reached. Then press the A-B button once more.
The A-B indicator will light.
• The pickup will now return to the starting point and repeat
playback of the selected interval.
• This interval will be repeated until the A-B repeat mode is
cancelled by pressing the A-B repeat button. The A-B
indicator goes out.
• A-B repeat playback is not possible during programmed
playback.
Hide quick links:
Advertisement
Table of Contents
