Fax Settings - Header Information - Konica Minolta bizhub 652 User Manual

10
10.4.6

Fax Settings - Header Information

Register sender information and fax ID that are included in TX documents that is to be printed on documents
received by the recipient.
Item
[Sender]
[Sender Fax No.]
10-16
Description
Allows you to register more than one sender name that is to be printed on
documents received by the recipient as sender information. Enter a text us-
ing up to 30 characters.
• To register a new sender, press [New].
• Possible to specify up to 20 types of views for senders.
• To change the settings for a registered sender, select the sender and then
press[Edit]. In the Edit screen, registered numbers cannot be changed.
• To delete a registered sender, select the sender to be deleted and then
press [Delete].
• To specify a sender as the default, select the sender and then press [Set
as Default].
• If two units of the Fax Kit FK-502 are installed, and [Individual Sender
Line Setup] is set to [ON] in Administrator Settings, default value can be
specified for each line. Select the sender to specify as the default, and
then press either [Set Line1 as Default] or [Set Line2 as Default]. For de-
tails on [Individual Sender Line Setup], refer to page 10-20. To specify the
fax ID of an extension line, refer to page 10-34.
The registered fax number is printed as the sender's information on the doc-
ument received by the recipient. Enter a sender fax number using 0-9, *, #,
[+], and space (up to 20 characters).
• If two units of the Fax Kit FK-502 are installed, register the sender fax
number for each of the two lines. To specify the fax ID of an extension
line, refer to page 10-34.
Administrator Settings (G3)
bizhub 652/552
10.4