Windshield Wiper Blade Replacement - Chevrolet HHR 2011 Owner's Manual

Windshield Wiper Blade
Replacement
Windshield wiper blades should be inspected for wear
or cracking. See Scheduled Maintenance on page 7 3
for more information on wiper blade inspection.
Replacement blades come in different types and are
removed in different ways. For the proper type and
length, see Maintenance Replacement Parts on
page 7 10. Here's how to remove the wiper blade:
1. Pull the windshield wiper arm away from the
windshield.
2. While holding the wiper arm, lift the clip up from
the blade connecting point, and pull the blade
assembly down toward the windshield to remove
it from the wiper arm.
6-46
3. Install the new wiper blade on the wiper arm and
press down on the clip to snap it into place.
Backglass Wiper Blade Replacement
1. Remove the protective cap from the wiper arm.
If the protective cap is not removed before lifting
the wiper arm, the wiper arm could be damaged.
2. Pull the wiper arm away from the backglass and
into the service position.
3. Rotate the wiper blade, and pull down on it to
remove it from the wiper arm.
4. Install the new wiper blade, then set the wiper arm
back into its original position and replace the
protective cap.