Pass-Key Iii+ Electronic Immobilizer; Immobilizer Operation - Chevrolet HHR 2011 Owner's Manual

®
PASS-Key III+ Electronic
Immobilizer
See Radio Frequency Statement on page 8 17 for
information regarding Part 15 of the Federal
Communications Commission (FCC) rules and Industry
Canada Standards RSS-210/220/310.
®
PASS-Key III+ Electronic

Immobilizer Operation

Your vehicle has PASS-Key
Automotive Security System) theft-deterrent system.
®
PASS-Key III+ is a passive theft-deterrent system.
The system is automatically armed when the key is
removed from the ignition.
You do not have to manually arm or disarm the system.
The security light will come on if there is a problem with
arming or disarming the theft-deterrent system.
®
When the PASS-Key III+ system senses that someone
is using the wrong key, it prevents the vehicle from
starting. Anyone using a trial-and-error method to start
the vehicle will be discouraged because of the high
number of electrical key codes.
®
III+ (Personalized
When trying to start the vehicle if the engine does not
start and the security light comes on, there may be a
problem with your theft-deterrent system. Turn the
ignition off and try again.
If the engine still does not start, and the key appears to
be undamaged, try another ignition key. At this time,
you may also want to check the fuse, see Fuses and
Circuit Breakers on page 6 101. If the engine still does
not start with the other key, your vehicle needs service.
If your vehicle does start, the first key may be faulty.
See your dealer who can service the PASS-Key
have a new key made. In an emergency, contact
Roadside Assistance. See Roadside Assistance
Program on page 8 6, for more information.
It may be possible for the PASS-Key
learn the transponder value of a new or replacement
key. Up to 10 keys may be programmed for the vehicle.
The following procedure is for programming additional
keys only. If all the currently programmed keys are lost
or do not operate, you must see your dealer or a
locksmith who can service PASS-Key
made and programmed to the system.
See your dealer or a locksmith who can service
®
PASS-Key III+ to get a new key blank that is cut
exactly as the ignition key that operates the system.
®
III+ to
®
III+ decoder to
®
III+ to have keys
3-19