Configuring The Message Waiting Indicator - Cisco SPA303 Administration Manual

Customizing Cisco SPA and Wireless IP Phones

Configuring the Message Waiting Indicator

STEP 6
Configuring the Message Waiting Indicator
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
• Idle Key List: Edit the field to add psk1|1 to the beginning of the string; for
example:
psk1|1;em_login;acd_login;acd_logout;avail;unavail;
redial;dir;cfwd;dnd;lcr;pickup;gpickup;unpark;em_logout;
• Off Hook Key List: Edit the field to add psk1|1 to the beginning of the string;
for example:
psk1|1;option;redial;dir;cfwd;dnd;lcr;unpark;pickup;
gpickup;
• Connected Key List: Edit the field to add psk1|1 to the string, editing the
softkeyname
existing
hold|1;endcall|2;conf|3;xfer|4;bxfer;confLx;xferLx;park;p
hold;flash;
becomes:
psk|1;hold|2;endcall|3;conf|4;xfer;bxfer;confLx;xferLx;
park;phold;flash
Click Submit All Changes. The "Sales" speed dial softkey is displayed in the lower
left of the screen when the phone is idle, when the phone is connected on a call,
and when the phone is off hook.
You can configure the message waiting indicator (MWI) for separate extensions on
the phone. The MWI lights based on the presence of new voicemail messages in
the mailbox. However, if the indicator at the top of your Cisco SPA300 Series or
Cisco SPA500 Series IP Phone is not lighting when voice mail is left, or you are not
seeing message waiting notifications on your WIP310:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the Ext <number> tab.
Under Call Feature Settings, in the Message Waiting field, choose yes.
|1 to PSK1. For example, the original string:
3
69