Cisco Spa500S Attendant Console; Network Configurations - Cisco SPA303 Administration Manual

Getting Started

Cisco SPA500S Attendant Console

Cisco SPA500S Attendant Console

Network Configurations

Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
The Cisco SPA500S Attendant Console is used with the Cisco SPA300 Series and
Cisco SPA500 Series IP Phone models to provide additional lines. The Cisco
SPA500S has 32 LEDs/buttons for dialing, call transfer, call pick up and call
monitoring. Multi-colored LEDs monitor the status of each configured voice line via
busy lamp field (BLF). You can attach two attendant consoles to an IP phone, for 64
LEDs/buttons. For more information, see
SPA500S Attendant Console."
The Cisco SPA IP Phones support Session Initiation Protocol (SIP) or Smart Phone
Control Protocol (SPCP). SPCP is supported only on the Cisco SPA300 Series or
Cisco SPA500 Series IP Phones.) You can use the Cisco SPA IP Phones as part of a
Cisco SPA 9000 Voice System phone network, or with any vendor's IP PBX system
that supports SIP. The Cisco SPA IP phones can be used as part of a Cisco SPA
9000 Voice System phone network, a SIP network, or as part of the Cisco Unified
Communications 500 Series for Small Business.
Chapter 9, "Configuring the Cisco
1
14