Configuring Call Hold Ringback; Configuring Stutter Message Waiting - Cisco 7940 User Manual

Configuring Call Hold Ringback

You can configure your phone to provide a ringback tone indicating a call is waiting on hold
when you hang up the active call by using the Call Hold Ringback feature.
Perform the following steps to configure the Call Hold Ringback feature.
Step 1: Press the settings button.
Step 2: Press the Scroll key to highlight Call Preferences.
Step 3: Press the Select softkey.
Step 4: Press the Scroll key to highlight Call Hold Ringback from the Call Preferences menu.
Step 5: To enable the Call Hold Ringback feature, press the Yes softkey. To disable the feature,
press the No softkey.
Step 6: Press the Save softkey to save your selection of this feature and display the Settings
menu.
Step 7: Press the Back softkey to display the main LCD screen.

Configuring Stutter Message Waiting

You can configure your phone to provide a stutter dial tone when there is a message waiting
when you receive dial tone for making a call by using the Stutter Msg. Waiting feature.
Perform the following steps to configure the Stutter Msg. Waiting feature.
Step 1: Press the settings button.
Step 2: Press the Scroll key to highlight Call Preferences.
Step 3: Press the Select softkey.
Step 4: Press the Scroll key to highlight Stutter Msg. Waiting from the Call Preferences menu.
Step 5: To enable the Stutter Msg. Waiting feature, press the Yes softkey. To disable the feature,
press the No softkey.
Step 6: Press the Save softkey to save your selection of this feature and display the Settings
menu.
Step 7: Press the Back softkey to display the main LCD screen.
Hostcomm Hosted Telephony
17
Using the Cisco IP Phone 7940/7960
User Guide