To place a call to the name shown on the display:
1. Pick up the handset.
2. While the name is shown, press the Call Disp button (if administered) or, if you do not
have a Call Disp button on your set, press the
the number using the dial pad.
Note: You can also leave your handset on-hook. The speakerphone will turn on
automatically when you press Call Disp if this system feature is enabled.
The dial intercom feature must be administered by MSU Telecom Systems.
To make a call to a member of your intercom group:
1. Press Intercom button.
2. Dial the group member's 1- or 2-digit code.
A special intercom ring is sent.
o
Using the Label Action screen, you can customize the labels of the call appearance/feature
buttons on the telephone, view the labels of the call appearance/feature buttons on the call
processing system, and restore the system labels of all the call appearance/feature buttons. You
can access this screen by pressing the Label softkey at the Home screen.
The Label Action screen is shown in the figure below.
Dial Intercom
Label Action
27
Phone/Exit button and then dial