Restoring The Handset Default Settings; Base Settings; Activating/Deactivating Music On Hold; Repeater Support - Gigaset C610 Manual

•
Restoring the handset
default settings
You can reset individual settings and
changes that you have made.
The following settings are not affected by a
reset
u
Registration to the base
u
Date and time
u
Directory entries, the call lists, the SMS
lists
Ï
¢ ¢
v
System
§Yes§
Press the display key.

Base settings

The base settings are carried out using a reg-
istered Gigaset C610H handset.
•
Activating/deactivating
music on hold
Ï
¢ ¢
v
Audio Settings
¢
Music on hold
§Change§
Press to activate or deactivate the
music on hold (³ = on).
¢
Handset Reset
•

Repeater support

With a repeater you can increase the range
and signal strength of your base. You will
need to activate repeater mode. This will ter-
minate any calls that are in progress at the
time.
Precondition: A repeater is registered.
Ï
¢ ¢
v
System
§Change§
Press to deactivate repeater mode
(³= on).
Please note
Eco Mode / Eco Mode+ (
repeater support cancel each other out,
i.e. if you use a repeater you cannot use
Eco Mode and Eco Mode+.
•
Protecting against
unauthorised access
Protect the system settings of the base with
a PIN known only to yourself. The system PIN
must be entered when, for example, regis-
tering/deregistering a handset to/from the
base or when restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN set on
the base (default setting: 0000) to a 4-digit
PIN known only by you.
Ï
¢ ¢
v
System
~
Enter the current system PIN
and press
~
Enter your new system PIN and
§OK§
press
Base settings
¢
Repeater Mode
¢
page 52) and
¢
System PIN
§OK§
.
.
63