Bosch Integral TM13 Operating Instructions Manual page 49

During a call, you can accept a second call and forward it to a subscriber within your
telephone system. Afterwards you will be automatically re–connected with your first
call partner.
Forwarding a second caller
5597 BERT
5511 VOGT
5573 SAMM
Additional call during an existing call A
You receive a second call while you are on
the phone.
±
You hear an alerting tone, and the bell
symbol flashes.
Press the "Interchange" function key.
You see the name and call number of the
Interchange
second caller.
Press the "Enter" key to be connected to
Enter
the second caller.
The flashing handset symbol indicates that
the first caller is waiting and can hear no-
thing of your conversation.
To forward the caller:
Press the "Refer back" key to initiate the
R
consultation.
Enter the number of the subscriber to
SAMM
whom you want to forward the call, e. g.
press a partner key.
You can now announce the call. Both
handset symbols flash. Your first call part-
ner is waiting.
Transferring the call:
Press the "Transfer call" function key.
Both subscribers will be connected to each
Transfer call
other, and you can continue your original
call.
Note:
A second caller cannot be connected to the
original call partner.
During a call
49