Status; Device Info - D-Link DIR-820L User Manual

The Status page displays the current Internet and connection details for the DIR-820L. It displays the WAN, LAN, and Wireless
information. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be
displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP.
If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect
to drop the PPPoE connection and use Connect to establish the PPPoE connection.
WAN: Displays the MAC Address and the public IP settings.
LAN: Displays the MAC Address and the private (local) IP settings for the
router.
Wireless LAN: Displays the 2.4GHz wireless MAC Address and your wireless settings
such as Network Name (SSID) and Channel.
Wireless LAN2: Displays the 5GHz wireless MAC Address and your wireless settings
such as Network Name (SSID) and Channel.
LAN Computers: Displays computers and devices that are connected to the router via
Ethernet and that are receiving an IP Address assigned by the router
(DHCP).
IGMP Multicast Displays Multicast Group Address.
Memberships:
D-Link DIR-820L User Manual

Status

Device Info

100