Time - D-Link DIR-820L User Manual

The Time page allows you to configure, update, and maintain the correct time on the internal system clock. From this section
you can set the Time Zone that you are in and set the NTP (Network Time Protocol) Server. Daylight Saving Time can also be
set to automatically adjust the time when needed.
Current Router
Displays the current date and time of the router.

Time:

Time Zone: Select your Time Zone from the drop-down
menu.
Enable Daylight Check the box to Enable Daylight Saving. To
Saving: set the start and end of Daylight Saving Time
manually, enter a DST Start date and a DST End
date. (Month, Week, Day of Week, and Time.)
Enable NTP Server:
An NTP server (for Network Time Protocol) will
sync the time and date with your router. This will
only connect to a server on the Internet, not a
local server. Check the box to enable this feature.
NTP Server Used:
Enter the IP address of a NTP server or select one
from the drop-down menu.
Set Date and Time
To manually input the date and time, enter the
Manually: values for the Year, Month, Day, Hour, Minute,
and Second. Click Set Time.
You can also click Copy Your Computer's Time
Settings to synch the date and time with the
computer you are currently on.
D-Link DIR-820L User Manual
Time
91