Shareport ™ Mobile/Web Access Manual Setup - D-Link DIR-820L User Manual

Below are step-by-step instructions on how to access files that are on your USB thumb drive or external hard drive that is connected to your router:
Step 1 - Enable SharePort Web Access
Check the Enable SharePort Web Access checkbox to enable. Enter
the port(s) you want to use. The default for HTTP is 8181 and HTTPS is
4433. Check the box if you want to Allow Remote Access.
Step 2 - Create a User Account
Under User Creation, enter a User Name and Password, and verify your
password. Click Add/Edit.
Step 3 - Configure your Access Path
Under User List, click the Modify icon for the user you just created.
Here you can locate the folder on your USB storage device for which
you want to assign access. (Refer to screen shot at bottom of page.*)
Step 4 - Save Settings
If you want to add more users, repeat steps 2 and 3. Once you are
finished, click the Save Settings button at the top to save your settings.
Step 5 - Connect
At the bottom of the screen, you will see the link you can use to connect
to the USB drive. Remember to use HTTPS to get a secure connection.
Note: If you changed the HTTPS Access Port to 3200, and your WAN IP
address is 1.2.3.4, then you must enter HTTPS://1.2.3.4:3200 to connect.
*Append/New Folder window opens when you click the Modify icon
from the User List. Click on Browse to locate the folder on the USB
storage device. Select Permission from the drop-down menu and
click OK.
D-Link DIR-820L User Manual
SharePort Mobile/Web Access Manual Setup
™
50