D-Link DIR-820L User Manual page 68

Enable DHCP-PD:
Check to enable DHCP-PD.
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Link-Local
Displays the Router's LAN Link-Local Address.
Address:
Enable Automatic IPv6 Check to enable the IPv6 Autoconfiguration.
address assignment:
Check to enable delegation of previxes for router addresses.
Enable Automatic DHCP-
PD in LAN:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC +
Autoconfiguration Type:
Stateless DHCPv6.
Enter the start IPv6 Address for the DHCPv6 range for your
IPv6 Address Range Start:
local computers.
Enter the end IPv6 Address for the DHCPv6 range for your
IPv6 Address Range End:
local computers.
Router Advertisement
Enter the Router Advertisement Lifetime (in minutes).
Lifetime:
Click Save Settings.
D-Link DIR-820L User Manual 63