Ipv6 In Ipv4 Tunnel - D-Link DIR-820L User Manual

My IPv6 Connection is: Select IPv6 in IPv4 Tunnel from the drop-down menu.

IPv6 in IPv4 Tunnel

Settings: Enter the settings supplied by your Internet provider (ISP).
IPv6 DNS Settings:
Select either Obtain IPv6 DNS server address automatically
or Use the following IPv6 DNS Servers
Primary/Secondary
Enter the primary and secondary DNS server addresses.
IPv6 DNS Servers:
Enable DHCP-PD:
Check to enable DHCP-PD.
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Link-Local
Displays the Router's LAN Link-Local Address.
Address:
Enable Automatic IPv6
Check to enable the Autoconfiguration feature.
Address Assignment:
Enable Automatic
Check to enable delegation of prefixes for router addresses.
DHCP-PD in LAN:
Autoconfiguration
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless
Type:
DHCPv6.
IPv6 Address Range
Enter the start IPv6 Address for the DHCPv6 range for your local
Start:
computers.
IPv6 Address Range
Enter the end IPv6 Address for the DHCPv6 range for your local
End:
computers.
Router Advertisement
Enter the Router Advertisement Lifetime (in minutes).
Lifetime:
Click Save Settings.
D-Link DIR-820L User Manual
IPv6 in IPv4 Tunnel
64