Accessories Menu Tab; Using Screen Snapshot - Humminbird 786ci Operation Manual

Accessories Menu Tab

From any view, press the MENU key twice to access the tabbed Main Menu,
then press the RIGHT Cursor key until the Accessories tab is selected.
If there are not accessories attached to the Accessory Bus, Screen Snapshot
will be the only menu choice available. If an accessory is attached, however,
additional menu choices that support the accessory will be added
automatically. See the Operations Manual that comes with your accessory for
detailed information.
Accessories Menu Tab
(no accessories attached)
NOTE: Accessories to enable WeatherSense® and the SmartCast® Wireless Sonar Link
require separate purchases. You can visit our web site at www.humminbird.com or
contact our Customer Resource Center at 1-800-633-1468 for additional details.
function. When Screen Snapshot is enabled, pressing the MARK key creates a
saved screen capture on the optional-purchase MMC/SD card installed in your
unit's card slot. All active menus, dialog boxes, warnings and messages are
captured and saved automatically.
NOTE: For more information, see Views: Screen Snapshot View and Screen
Snapshot X-Press™ Menu.
NOTE: You must have an optional-purchase MMC/SD card installed for the Screen
Snapshot feature to work.

Using Screen Snapshot

Screen Snapshot activates the screen snapshot
112
Accessories Menu Tab
(with accessories attached)
Accessories Menu Tab