Advertisement
2. If either Cover is opened during the grinding or brewing process
both will stop until the Grinder Cover is installed and the Coffee
Maker Cover is closed. Restart the Coffee Maker by pressing
the ON/OFF Button. If you do not want the use the Grinder, press
the Grinder Off Button before pressing the ON Button.
CARE AnD CLEAnInG
1. Turn the Coffee Maker off, unplug and let cool before cleaning.
2. Open the Coffee Maker Cover and remove the Grinder Cover and
Grinder.
3. Gently slide out the Filter Basket. Remove the Filter Basket Cover and
the Permanent Filter. Empty out ground coffee.
4. The Grinder, Grinder Cover, Permanent Filter, Filter Basket Cover and
Filter Basket can be washed in the top rack of the dishwasher or
in warm soapy water.
5. Once the Grinder has been removed do not put any water in the top
of the unit. The area around the Grinder can be wiped with a soft damp
cloth. Do not allow any water to get into the grinder motor as this
could damage the motor.
6. The Grinder Trap Door Assembly can be removed
for cleaning. (Ill. 5). Press the right side tab
towards the left. Lift up the assembly and clean.
To replace place the 2 notches on the left side
of the Assembly into the holes on the left side
of the assembly holder then press down on the
right side until it snaps into position.
7. Wash the Carafe and Lid and the Permanent Filter in warm soapy water.
Rinse and dry. Do not use scouring powders or harsh chemicals on
the carafe or any parts of the Coffee Maker.
8. Wipe the Main Housing and Bottom Plate with a soft damp cloth.
NEVER IMMERSE THE MAIN HOUSING IN WATER OR ANY OTHER
LIQUID. Wipe with a clean soft cloth to dry before storing.
Ill. 5
9
Advertisement
