Section 7-Seat; Removing/Installing The Seat Assembly; Removing; Installing - Invacare Pronto M41 Owner's Manual

SECTION 7—SEAT
After any adjustments, repair or service and before use, make sure that all attaching
hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service verify that On/Off
switch on the joystick is in the Off position.

Removing/Installing the Seat Assembly

NOTE: For this procedure, refer to FIGURE 7.1.

Removing

1. Disconnect the joystick. Refer to Disconnecting/Connecting the Joystick on page 56.
2. Fold down the seat back.
3. Pull the seat lever up and lift the seat assembly up and away from the seat post.

Installing

1. Align the seat pivot with the seat post
2. Pull the seat lever up and lower the seat
assembly on the seat post.
NOTE: If necessary, slightly twist seat
assembly back and forth to lock it in place.
3. Release the seat lever.
4. Pull the seat assembly up to ensure that
it is locked in place.
5. Connect the joystick. Refer to
Disconnecting/Connecting the Joystick
on page 56.
Part No. 1143206
WARNING
Seat Back
Seat
Lever
Seat
Post
FIGURE 7.1 Removing/Installing the Seat
37
SECTION 7—SEAT
Seat
Assembly
Seat Pivot
(hidden
from view)
Assembly
Pronto® M41 with SureStep®