Delay Start Button - Haier HLP24E Service Manual

Service Manual
Order No. TL1001S003V0

DELAY START BUTTON

Press this button to delay the start of your wash cycle between 1 - 24 hours
in one hour increments.
Use this button to select a delayed start of the washer. The number of hours
will be shown in the Estimated Time Remaining Display. Each press of the
Delay Start Button will increase the time by 1 hour.
One button press after 24 will cancel the Delay Start feature. You can also
POWER Button.
The START/PAUSE Button must be selected to begin the countdown.
ESTIMATED TIME REMAINING DISPLAY
The Estimated Time Remaining Display shows the estimated cycle time in
minutes.
When the Delay Start option is being used, the Estimated Time Remaining
Display will show the delay time in hours.
START/PAUSE BUTTON
Press this button to start a selected cycle or to pause an operating cycle.
NOTE: After starting the wash cycle, you must pause the operating cycle to
change the Water Level setting.
POWER BUTTON
Press the POWER button to turn on the washer.
NOTE: If the washer is turned on, but START/PAUSE is not pressed, the power
10
Issue
Rev.