Delay Start Button; Cycle Status Indicators - Haier HLP24E User Manual

DELAY START BUTTON

Press this button to delay the start of your wash cycle between 1 - 24 hours
in one hour increments.
Use this button to select a delayed start of the washer. The number of hours
will be shown in the Estimated Time Remaining Display. Each press of the
Delay Wash Button will increase the time by 1 hour.
One button press after 24 will cancel the delay wash feature. You can also
Power Button.
The Start/Pause Button must be selected to begin the countdown.

CYCLE STATUS INDICATORS

The Cycle Status lights indicate the stages of the selected cycle.
START/PAUSE BUTTON
Press this button to start a selected cycle or to pause an operating cycle.
NOTE: After starting the wash cycle, you must pause the operating cycle to
change the Wash Temp, Soil Level and Water Level settings.
POWER BUTTON
Press the power button to turn on the washer.
NOTE: If the washer is turned on, but START is not pressed, the power will
13