Port Triggering; Figure 66: Add Or Modify A Virtual Server Entry - SMC Networks SMCWBR14S-N5 User Manual

Figure 66: Add or Modify a Virtual Server Entry

N
OTE
service, please select another service, and enter the same IP Address for
that computer or server.
To modify or delete an existing entry:
1.
2.
3.
4.
5.
6.
N
OTE
the Web management port on "Security –> Remote Management" page
to be any other value except 80, such as 8080. Otherwise there will be a
conflict, which will disable the virtual server.
Select Special Application -> Port Triggering from the menu; you can
P T
ORT RIGGERING
view and add port triggering in the next screen (shown in
applications require multiple connections, like Internet games, video
conferencing, Internet calling and so on. These applications cannot work
with a pure NAT Router. Port Triggering is used for some of these
applications that can work with a NAT Router.
If your computer or server has more than one type of available
:
Click Modify for the entry you want to modify. If you want to delete the
entry, click Delete.
Modify the information.
Click the Save button.
Click the Enable/Disable All button to enable/disable all entries.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and click the Previous
button to return the previous page.
If you set the service port of the virtual server as 80, you must set
:
– 78 –
| Configuring the Router
C 4
HAPTER
Special Application
Figure 67). Some