Figure 57: The WPS Configuration Screen of Wireless Adapter
The default PIN code of the Router can be found on its label, or in
N
:
OTE
the WPS configuration screen, as shown in
You will see the following screen when the new device is successfully
connected to the network.
Figure 58: Add a New Device
The WPS LED on the Router will turn on green for five minutes when
N
:
OTE
a device has been successfully added to the network.
The WPS function cannot be configured if the wireless function of the
N
:
OTE
Router is disabled. Make sure the wireless function is enabled before
configuring WPS.
– 72 –
| Configuring the Router
C
4
HAPTER
Figure
45.
Wireless