Table of Contents
Advertisement
Recording a Program
Video Dubbing (copying and editing tapes)
1. Press LINE IN on the remote control of the TV/VCR. "Line in"
2. Insert the tape you want to copy into the playback VCR or
3. Start the playback VCR or camcorder playing. If the tape was
4. At the same time, press REC on the TV/VCR's remote and PLAY
5. To edit out segments that you do not want to copy, press PAUSE
6. Press STOP on both the TV/VCR's remote and the VCR or
7.
24
Use another VCR or camcorder as the playback VCR and the
TV/VCR as the recording VCR.
(Refer to page 29 to connect your TV/VCR to another VCR or
camcorder before attempting video dubbing.)
appears on the screen.
camcorder. Insert a blank tape with safety tab intact into the
TV/VCR.
not recorded on the playback VCR, streaks may appear and you
may need to adjust the tracking. When you reach the place you
want to begin copying, press STOP.
on the VCR or camcorder to begin copying the tape.
on the TV/VCR's remote during the undesired segment. Press
PAUSE again to resume dubbing at desired point.
camcorder when you are finished.
Press LINE IN on the TV/VCR's remote to return to normal TV
viewing.
Caution: The unauthorized recording of television programs
and other materials may infringe the rights of others.
Line in
Advertisement
Table of Contents
