Playing a Tape
Operating Instructions
To Play a Tape
14
POWER
STOP/ EJECT
REC
REC
Safety Tab
1. When you insert a tape in the TV/VCR, the TV/VCR
automatically turns on. The channel and mode indicators, time
counter and tape speed displays appear momentarily when you
insert a tape.
2. The tape automatically begins to play if the safety tab on the
cassette has been removed. Or, press PLAY if necessary.
3. If necessary, the TV/VCR will automatically adjust the tape's
tracking. Or you can also press TRACK + or - on the remote to
manually remove any streaks from the picture during playback.
4. Press STOP on the remote or STOP/EJECT on the TV/VCR to
stop playback.
5. The TV/VCR will automatically rewind a tape when it reaches
the end. If you press POWER while a tape is rewinding, the
TV/VCR will rewind the tape fully and then shut itself off.
6. Press EJECT on the remote or STOP/EJECT on the TV/VCR to
eject the tape once it is completely rewound.
A cassette may be ejected with the power turned off.
POWER
CH
VOL
PLAY
REW
FF