Table of Contents
Advertisement
Playing a Tape
Using the Playback Features
Setting the Block Repeat Feature
Selecting the Area to Repeat
18
This feature tells the TV/VCR to play a tape (or a "block" of part of
the tape) from one to ten times or endlessly.
1. Press MENU on the remote to display the main menu; press CH
4
or
until VCR Setup is highlighted; press VOL+ or - to display
the VCR Setup menu.
3
4
2. Press CH
or
to select Block Repeat.
3. Continually press VOL+ to select the number of times you want
the "block" to repeat. Select "Endless" or any number of times
from 1 to 10. Press MENU twice to remove the displays.
Block Repeat must be turned on before you can select the area to
repeat.
1. While viewing a video tape, press REPEAT at the beginning of a
block of tape that you wish to repeat. Press REPEAT again at the
end of the block. The TV/VCR will rewind the tape to the
beginning of the block and repeat it as many times as you
indicated in the Block Repeat menu. "Repeat" appears on the
screen while the tape is rewinding.
Note: the block that you select to repeat should be more than ten
seconds long.
2. To stop block repeat, press STOP or PAUSE, or rewind or fast
forward to a part of the tape that is outside the "block". Any of
these actions cancels the block you have selected to repeat.
3. To turn off Block Repeat, repeat steps 1 to 3 in "Setting the Block
Repeat Feature", selecting "Off" in Step 3.
3
VCR Setup
True Repeat
Off
Block Repeat
2
Demonstration
Off
:Adjust
:Move
:Menu
Advertisement
Table of Contents
