Table of Contents
Advertisement
Playing a Tape
Using the Playback Features
Setting the True Repeat Feature
This feature tells the TV/VCR to automatically rewind and replay a
tape after it has played to the end.
1. Press MENU on the remote to display the main menu; press CH
2. Press CH
3. Press VOL + to select "On".
Using True Repeat
1. To start the tape playing, press the PLAY button. To stop the
2. To turn off the True Repeat feature, repeat steps 1 through 3,
4
or
until VCR Setup is highlighted; press VOL + or - to display
the VCR Setup menu.
3
4
or
to highlight True Repeat.
With the True Repeat feature on, a tape will automatically
rewind after it has reached the end and will be replaying.
tape playing, press the STOP button.
selecting "Off" in step 3.
Note: If the TV/VCR reaches an unrecorded section of tape
during playback, it will search forward and check the tape again.
The TV/VCR will continue to search until it finds a recorded
section, when it will begin playing.
3
VCR Setup
True Repeat
On
Block Repeat
Off
Demonstration
Off
:Adjust
:Move
:Menu
17
Advertisement
Table of Contents
