Program Review (Checking Or Clearing Timer Recordings) - RCA TV/VCR COMBINATION User Manual

Recording a Program
Recording at a Later Time (timer recording)
Setting a Timer Recording (cont.)
4.
5.
Program Review
(Checking or Clearing Timer Recordings)
After you have set your recording, press MENU three times to
return to normal viewing. Turn off the TV before time to
record. The REC indicator on the TV's front panel will light
when a timer recording has begun.
To watch the channel while it is being recorded, press POWER
on the remote control only.
Note: If a power interuption occurs for more than 40 seconds,
all programs will be removed from memory until and unless
you reset the TV/VCR's clock.
If you are recording from a cable box, turn it on and tune it to
the channel you want to record before time for the recording
to begin.
1. Press MENU on the remote to display the main menu; press
3 4
CH or until Timer Record is highlighted; press VOL+ or - to
display the Timer Record menu.
3 4
2. Press CH or to highlight the Program Review menu.
3. Repeatedly press VOL+ to see information on each program that
has been stored.
4. Press CLEAR to erase a program.
Note: If there are no programs stores, pressing the VOL+ button
while Program Review is highlighted will do nothing.
Timer Record
One Time Program
Daily Program
Weekly Program
Program Review
:Enter
:Move
:Menu
23