Sharp MX-FXX1 Manual page 78

5
To cancel scanning...
Press the [STOP] key (
6
Before scanning the back of the card, you can touch the [Configure] key in the touch panel to change the exposure.
To cancel scanning...
Press the [STOP] key (
Place next original.
Press [Start].
When finished, press [Read-End].
7
If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure,
resolution, scan size, and send size.
• The ratio cannot be specified and "Rotation Sending Setting" cannot be selected.
• This function cannot be used in direct transmission mode or when the speaker is used to dial.
To cancel Card Shot...
Touch the [Cancel] key in the screen of step 3.
).
).
(Pg.No.x)
Configure Read-End
Press the [BLACK & WHITE START] key
( ) to scan the front of the card.
Turn the card over so that the back is
face down, and press the [BLACK &
WHITE START] key (
back of the card.
Touch the [Read-End] key.
78
) to scan the