Erasing Peripheral Shadows On The Image (Erase) - Sharp MX-FXX1 Manual

ERASING PERIPHERAL SHADOWS ON THE
IMAGE (Erase)
The erase function is used to erase shadows on images produced when scanning thick originals or books.
(This function erases the parts of the image where shadows tend to form. The function does not detect shadows and
erase only the shadows.)
Scanning a thick book
Shadows appear here.
Erase modes
Edge Erase
This erases shadows
that appear at the
edges of the image
when thick originals
or books are faxed.
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the [Erase] key.
☞
Special modes menu (1st screen)
(1)
Fax/Special Modes
Erase
3
Edge Centre
Erase Erase
(page 60)
(2)
Cancel
Edge+Centre
Edge
Erase
10
(0~20)
mm
Not using the erase
function
Shadows appear in the image.
Centre Erase
This erases shadows
at the bindings of
books or other bound
documents.
Select the erase settings.
(3)
(1) Touch the desired erase mode.
OK
OK
Select one of the three erase modes.
(2) Set the erasure width with the
0 mm to 20 mm (0" to 1") can be entered.
(3) Touch the [OK] key.
65
Using the erase
function
No shadows appear.
Edge + Centre
Erase
This erases shadows
at both the edges
and the binding.
keys.