Sharp MX-FXX1 Manual page 117

• Completed job
Message
"Send OK" Transmission completed.
"In Memory" Reception completed but the fax
has not been printed. (The
received fax is being held by the
print hold function.)
"Printed" The received fax has been printed.
"Forward OK" The received fax has been
forwarded.
"Stopped" The job was stopped.
"Number of Broadcast transmission or serial
successful polling completed.
transmission If transmission to 3 destinations
destinations / was successful out of a total of 5,
Total "003/005" will appear.
destinations
OK"
"No An error occurred because there
response" was no response from the
destination.
"Busy" An error occurred because the
other party was busy.
"Reject A fax was sent from a party that
Reception" has been blocked by the anti junk
fax function.
"NGxxxxxx" Transmission/reception was not
successful because a
communication error occurred (a
6-digit error code appears in
xxxxxx.)
"Error" An error occurred while the job was
being executed.
Status
117