Table of Contents
Advertisement
Changing the Tripmaster TOTAL kilometer reading
If the TOTAL kilometer reading differs from the kilometers indicated in the
rally map (e.g. if you have taken the wrong road), the TOTAL value can be
corrected.
– Press the
key to switch to the ROADBOOK display.
E/R
– Depress the
key for two seconds.
The 1st digit of the TOTAL reading flashes and can be altered
with
and
.
E/R
– Press the
key.
The 2nd digit flashes and can be altered with
E/R
– Press the
key.
The 3rd digit flashes and can be altered with
E/R
– Press the
key.
The 4th digit flashes and can be altered with
E/R
– Press the
key.
The 5th digit flashes and can be altered with
E/R
– Press the
key.
The 6th digit flashes and can be altered with
E/R
– Press the
key to finish the correction procedure.
Tripmaster parametrization
The Tripmaster PARAMETRIZATION function can be used to change the
basic settings.
– Press the
key to switch to the BASIC FUNCTION display.
E/R
– Depress the
key for 2 seconds.
The HOURS of the time reading flash and can be altered with
E/R
– Press the
key.
The MINUTES of the time reading flash and can be altered with
E/R
– Press the
key.
CORRECT CIRCUMFERENCE, correct with
Here the accuracy of the speedometer and of all kilometer counters can
be adjusted. The setting – 1% need not be changed when using the
standard tire (90/90-21 Metzeler Enduro 3). However, correcting the cir-
cumference can be necessary when a different tire dimension is used on
the front wheel.
Additionally, this function can be used to adjust the kilometer counter to
the rally map.
E/R
– Press the
key.
SELECT LANGUAGE; use
E/R
– Press the
key.
SELECT KILOMETER / MILES; use
miles.
E/R
– Press the
key.
SELECT 12 / 24 H; use
display mode.
E/R
– Press the
key.
ROADBOOK FUNCTION; use
display modes:
TOTAL DISTANCE BIG / STRETCH SMALL
STRETCH BIG / TOTAL DISTANCE SMALL
E/R
– Press the
key.
CORRECTION ROADBOOK 10/50/100 m.
This function is not active in your model. A remote control device can be
ordered as an optional accessory.
E/R
– Press the
key.
DATA SAVING - PLEASE WAIT; the basic settings are now stored in the
memory. This memory does not rely on the battery so that the values are
not lost if the battery is disconnected.
and
.
and
.
and
.
and
.
and
.
and
(+/- 10 %).
and
to select either German or English.
and
to select either kilometers or
and
to select either the 12 or the 24 hour
and
to select either of the following
7
and
.
and
.
- Quick Links:
- Wiring Diagram
- Engine Oil
Hide quick links:
Advertisement
Table of Contents
