Appendix A: Configuring The 9112I At The Asterisk Ip Pbx - Aastra 9133i Administrator's Manual

Appendix A: Configuring the 9133i at the Asterisk IP PBX
The following configuration illustrates how to create a user with an extension
to make and receive calls using the Asterisk as the PBX. This configuration is
defined in the "sip.conf" file present along with the other configuration files
that are created when Asterisk is installed. Usually, the configuration files can
be found at the "/etc/asterisk" directory.
;This is used in the "extensions.conf" file to identify this
;physical phone when issuing Dial commands.
[phone1]
;The type to use for the 9133i is "friend".
;"Peer" is used when the Asterisk is contacting a proxy,
;"user" is used for phones that can only make calls
;and "friend" acts as both a peer and a user.
type=friend
;If your host has an entry in your DNS then you just enter the
;machines name in the host= field.
host=dynamic
defaultip=192.168.1.1
;The password that phone1 will use to register with this PBX
secret=1234
dtmfmode=rfc2833
mailbox=1000
;If a phone is not in a valid context you will not be
;able to use it. In this example' sip' is used. You can use
;whatever you like, but make sure they are the same, you will
;need to make an entry in your extensions.conf file (which we
;will get to later)
context=sip
callerid="Phone 1" <1234>
23
;default IP address that the phone is
;configured to
;Choices are inband, rfc2833, or info
;Mailbox for message waiting indicator
Model 9133i SIP Admin Guide