Page 1
9133i IP PHONE Release # 1.0 INSTALLATION GUIDE...
Page 2
Software in object form solely with the Equipment for which the Software was intended. This Product may integrate programs, licensed to Aastra by third party Suppliers, for distribution under the terms of this agree- ment. These programs are confidential and proprietary, and are protected as such by copyright law as unpublished works and by international treaties to the fullest extent under the applicable law of the jurisdiction of the Customer.
Table of Contents Introduction ....................1 Phone Features ..................1 Requirements .....................1 About This Guide ..................1 Phone Parts ....................2 Key Description ...................3 Key Description ...................4 Installation and Setup .................5 Direct Network Connection .................5 Connecting to the Network and to Power ...........5 Power Adapter ....................5 Connecting a Handset or Headset ..............5 Headset (Optional) ..................6 Desk or Wall Installation ................6...
Congratulations on your purchase of the Model 9133i IP Phone! The 9133i communicates over an IP Network, allowing you to receive and place calls in the same manner as a regular business telephone. This release of the 9133i is capable of supporting the SIP protocol.
Supply A PoE (Power over Ethernet) inline power adapter supplies 48v power to the 9133i through the Ethernet Cable on pins 1 & 2 and 3 & 6. Do not use this power supply to power other devices. • Voltage: 110/120 V AC in; 48 V DC out Safety and emissions: Canada: ICES-003 Class A;...
Key Description Set Indicator Light Options Key Backlit Display Navigational Keys Handset Volume Bar Dial Pad Line/Call Appearence Keys and Lights 14 Memory Keys Model 9133i Installation Guide...
Page 7
Redials up to ten previously dialed numbers. Pressing one of the line or call appearance buttons connects you to a line or call. * See your 9133i User Guide for further information. Activates the speaker and microphone so you can listen and talk with- out using the handset;...
Installation and Setup The 9133i can be setup to share a network connection with another network device. Power can be provided by an 802.3af compliant network power source or with a PoE inline power supply (optional accessory). It can also be installed on a desk or mounted on the wall.
Then route the handset cord through the upper groove as shown in the next illustration. Attach the handset to the other end of the handset cord. Model 9133i Installation Guide...
Place the card into the memory key card slot on the telephone. Gently bend the clear plastic lens and place it on top of the memory key card in the slot. Model 9133i Installation Guide...
find There is a list of configuration the Timeserver. If the Timeserver options, accessed by pressing the unknown to the 9133i, the IP Ibutton. address displays as 0.0.0.0, and the time and date in the main Setting your Options screen displays 12:00 am Jan.
Page 13
firmware Turn on or off the dial pad mode. version you have in your 9133i IP With Live Dial Pad ON, the 9133i IP Phone. Phone automatically dials out and turns ON Hands free mode as soon 8.
Contact your System and press the volume button u while there is no active Administrator or see the 9133i User Guide for more information on call. There are 8 settings for the ringer — the display tempo- programmable keys.
Ethernet, you can obtain an additional accessory, the a PoE inline power supply, to provide power over Ethernet locally to your phone. See “Connecting to the Network and to Power” on page 6 for details. Model 9133i Installation Guide...
Repairs to this product may be made only by the manufacturer and its Aastra Telecom shall not be liable for authorized agents, or by others who any incidental or consequential are legally authorized. This restriction...