Table of Contents
Advertisement
need to use the PUK code to unblock it before you can use
the SIM card again.
To set the keypad to lock automatically after a defined
period, select
Phone and SIM card
period.
To set a time-out after which the device is automatically
locked and can be used only if the correct lock code is
entered, select
Phone and SIM card
period. Enter a number for the time-out in minutes or
select
None
to set off the autolock period. When the device
is locked, you can still answer incoming calls, and calls may
still be possible to the official emergency number
programed into your device.
To set a new lock code, select
code. The preset lock code is 12345. Enter the current code
and then the new code twice. The new code can be 4-255
characters long. Both alphabets and digits can be used,
and both uppercase and lowercase alphabets are possible.
The device notifies you if the lock code is not properly
formatted.
Restore original settings
To restore the original device settings, select
panel
Settings
>
do this, you need your device lock code. After resetting,
the device may take a longer time to power on.
Documents, contact information, calendar entries, and
files are unaffected.
124
Keypad autolock
>
Phone autolock
>
Phone and SIM card
and
General
Factory
>
Positioning settings
Select
Menu
Positioning.
To use a specific positioning method to detect the location
of your device, select
To select a positioning server, select
To select which measurement system you want to use for
speeds and distances, select
Measurement
To define in which format the coordinate information is
displayed in your device, select
Coordinate
Lock
>
E-mail key settings
Select
Menu
To select which mailbox to open with the e-mail key, select
E-mail key settings
key.
Telephone settings
Menu
Ctrl.
>
settings. To
Select
Menu
Select from the following:
Call
•
Call forwarding
•
settings.
Call restriction
•
See "Call restrictions," p. 32.
Ctrl. panel
Settings
>
>
Positioning
Notation preferences
system.
Notation preferences
format.
Ctrl. panel
Settings
>
>
E-mail key
>
Ctrl. panel
Settings
>
>
— Define general call settings.
— Define your call forwarding
See "Call forward," p. 31.
— Define your call restricting settings.
and
General
>
methods.
Positioning
server.
>
>
and General.
and press the scroll
and Phone.
Advertisement
Table of Contents
