Security And Data Management; Lock The Device; Memory Card Security - Nokia E72 User Manual

Security and data management

Manage the data and software on your device, and take
care of the security of the device and its contents.
Important: Your device can only support one
antivirus application. Having more than one application
with antivirus functionality could affect performance and
operation or cause the device to stop functioning.

Lock the device

The lock code protects your device against unauthorized
use. The preset code is 12345.
To lock the device, in the home screen, press the power
key, and select Lock phone.
To unlock your device, select Unlock, enter the lock code,
and select OK.
To change the lock code, select
Settings and General
>
card. Enter the old code and then the new code twice. The
new code can be 4-255 characters long. Both letters and
digits can be used, and both uppercase and lowercase
letters are possible.
Write down the new code, and keep it secret and in a safe
place separate from your device. If you forget the lock code
and your device is locked, you must take the device to a
Nokia authorized service facility and additional charges
may apply. To unlock the device, the software must be
Menu Ctrl. panel
>
Security Phone and SIM
>
reloaded, and the data you have saved in the device may
be lost.
You can also lock the device remotely by sending a text
message to the device. To enable remote locking, and to
define the text for the message, select
panel Settings
>
and SIM card
>
Enter the remote lock message, and confirm the message.
The message must be at least 5 characters long. Write
down the text, as you may need it later.

Memory card security

Select Menu Office
>
You can protect a memory card with a password to prevent
unauthorized access. To set a password, select
Memory card password
to 8 characters long and is case-sensitive. The password is
>
stored in your device. You do not need to enter it again
while you use the memory card on the same device. If you
use the memory card on another device, you are asked for
the password. Not all memory cards support password
protection.
To remove the memory card password, select
Memory card password
the password, the data on the memory card is not
protected against unauthorized use.
Menu
and General Security
>
Remote phone locking
File mgr..
>
> Set. The password can be up
> Remove. When you remove
Ctrl.
>
Phone
>
> Enabled.
Options
>
Options
>
111