Telephone Settings - Nokia E Series User Manual

Avoid using codes that are similar to emergency
numbers to prevent accidental dialling of the
emergency number. Codes are shown as asterisks.
When you change a code, enter the current code, then
the new code twice.
Device and SIM card security
To change the PIN code, select Phone and SIM card
PIN code. The new code must be 4 to 8 digits long. The
PIN code protects your SIM card against unauthorised
use and is provided with the SIM card. After three
consecutive incorrect PIN code entries, the code is
blocked, and you need to use the PUK code to unblock
it before you can use the SIM card again.
To set the keypad to lock automatically after a defined
period, select Phone and SIM card Keypad
>
autolock period.
To set a time-out after which the device is
automatically locked and can be used only if the correct
lock code is entered, select Phone and SIM card
Phone autolock period. Enter a number for the time-
out in minutes, or select None to set off the autolock
period. When the device is locked, you can still answer
incoming calls, and calls may still be possible to the
official emergency number programmed into your
device.
To set a new lock code, select Phone and SIM card
Lock code. The preset lock code is 12345. Enter the
current code and then the new code twice. The new
code can be 4-255 characters long. Both alphabets and
digits can be used, and both uppercase and lowercase
alphabets are possible. The device notifies you if the
lock code is not properly formatted.
Cyan Cyan Cyan Cyan Magenta Magenta Magenta Magenta
Restore original settings
To restore the original device settings, select
settings. To do this, you need your device lock code.
After resetting, the device may take a longer time to
power on.

Telephone settings

>
Select Menu Tools Settings
> >
Call settings
To display your phone number to the person you are
calling, select Call Send my caller ID
>
the network determine whether your caller ID is sent,
select Set by network.
To be notified of a new incoming call while you have a
call in progress, select Call Call waiting
>
>
Options > Activate. To check if the function is active
on the network, select Options Check
>
To send a text message automatically to the person
who is calling you informing why you cannot answer
the incoming call, select Call Reject call with
>
SMS > Yes. To set the text for the message, select
Call Message text.
>
>
To set off the contact search on the home screen, select
Call Contact search > Off.
>
Yellow Yellow Yellow Yellow Black Black Black Black
Factory
> Phone.
> Yes. To let
>
status.
85