Packet Data Access Points; Create Access Point Groups - Nokia E72 User Manual

skip this step, you are asked to select a connection method
and to define the settings needed.
To edit the settings of an access point, select one of the
access point groups, scroll to an access point, and select
Edit. Use the instructions provided by your service
provider to edit the following:
Connection name — Enter a name for the connection.
•
Data bearer — Select the data connection type.
•
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined or with a red *. Other fields can be left
empty, unless your service provider has instructed
otherwise.
To use a data connection, your service provider must
support this feature, and if necessary, activate it for your
SIM card.

Create access point groups

Select Menu Ctrl. panel
>
Destinations.
Some applications allow you to use access point groups to
connect to a network.
To avoid selecting which access point to use every time
the device attempts to connect to a network, you can
create a group that contains various access points, and
define the order in which the access points are used to
connect to a network.
For example, you can add wireless LAN (WLAN) and packet
data access points to an internet access point group and
use the group for browsing the web. If you give the WLAN
access point the higher priority, the device connects to the
Settings and Connection
>
internet through a WLAN if available and through a packet
data connection if not.
To create a new access point group, select
Manage New destination.
>
To add access points to an access point group, select the
group and Options
existing access point from another group, select the
group, scroll to an existing access point, and select
Options Organize
>
To change the priority order of access points within a
group, scroll to an access point and
Organize Change
>

Packet data access points

Select Menu Ctrl. panel
>
Destinations Access
>
on the display. Or, open one of the access point groups,
and select an access point marked with
>
Use the instructions provided by your service provider to
edit the following:
Access point name
•
provided by your service provider.
User name — The user name may be needed to make
•
a data connection, and is usually provided by your
service provider.
Prompt password
•
ask for a password every time you log into a server, or
if you do not want to save your password in the device,
select Yes.
Password — A password may be needed to make a
•
data connection and is usually provided by your service
provider.
Options
New access point. To copy an
>
Copy to other dest..
>
Options
priority.
Settings and Connection
>
point, and follow the instructions
.
— The access point name is
— If you want to set the device to
>
>
>
127