Skil 2354 Operating/Safety Instructions Manual page 18

SM 1619X05087 05-12_SM 1619X05087 12-09 5/24/12
green indicator light depicting a forward arrow
will light up.
For reverse rotation move the lever to the far
right and the green indicator light depicting a
reverse arrow will light up.
To stop in either direction just release the
trigger. To activate trigger lock move lever to
the center off position (Fig. 1).
UTOLOCK™
Your tool is equipped with an automatic locking
system. This feature will lock the bit holder in
one position when the trigger switch is
released. This will allow you to tighten or loosen
a nut or screw by rotating the tool by hand with
the switch off. This is convenient when higher
turning torque is needed.
SITE-LIGHT™
Your tool is also equipped with a light that turns
on automatically when the switch is
activated for better visibility during operation
(Fig. 1). The Site-Light™ is maintenance free
and was designed to last the life of your tool.
CH RGING THE TOOL
For Model # F012235400: Plug charger into
your standard power outlet, then insert charger
plug into tool (Fig. 2).
The green charging indicator light on the tool
will turn "ON". This indicates that the battery is
receiving a fast charge. Fast-charging will
automatically stop when the battery is fully
charged.
18