Getting Started
7.
Install receipt/journal paper.
Important!
Take away the head protection sheet from the printer and close the platen arm.
Caution! (in handling the thermal paper)
• Never touch the printer head and the platen.
• Unpack the thermal paper just before your use.
• Avoid heat/direct sunlight.
• Avoid dusty and humid places for storage.
• Do not scratch the paper.
• Do not keep the printed paper under the following circumstances:
High humidity and temperature/direct sunlight/contact with glue, thinner or a rubber eraser.
To install receipt paper
12
E
Step 1
Remove the printer cover.
(If the cover is locked,
unlock by using the printer
cover key before this step.)
Step 2
Open the platen arm.
Step 3
Ensuring the paper is being
fed from the bottom of the
roll, lower the roll into the
space behind the printer.
Platen arm
Platen
Printer
Step 4
Put the leading end of the
paper over the printer.
Step 5
Close the platen arm slowly
until it locks steadily.
Locking platen
Complete
Close the printer cover,
passing the leading end of the
paper through the cutter slot.
www.cashregisters.net