Adjusting Captain's Seat Armrests - Invacare Ranger II Storm Series Ranger II Storm Series MWD/FWD Operator And Maintenance Manual

PROCEDURE 4
Positioning Flip Back Armrests for Use
1. Make sure the flip back armrest release lever is in
the UP (HORIZONTAL) position.
2. Install the flip back armrest into the front arm socket.
3. Lock flip back armrest by pressing flip back armrest
release lever into the DOWN (VERTICAL) position.
A 4. Lift up on flip back armrest to make sure the armrest
is locked in place.
R
M
5. Repeat STEPS 1-4 for opposite flip back armrest, if
S
necessary.
Adjusting
1. Unlock top of flip back armrest by pulling height ad-
justment lever into the UP (HORIZONTAL) position.
2. Adjust top of the flip back armrest to the desired height.
3. Lock top of flip back armrest by pushing height ad-
justment lever into the DOWN (VERTICAL) position.
4. Lift up on flip back armrest to make sure the armrest
is locked in place.
5. Repeat STEPS 1-4 for opposite flip back armrest, if
necessary.
ADJUSTING CAPTAIN'S SEAT
ARMRESTS
Angle (FIGURE 3)
1. Lift-up the armrest.
2. Loosen the jam nut.
3. Adjust the socket screw up or down to the desired
arm angle position.
4. Tighten the jam nut.
5. To determine the same angle for the opposite arm-
rest, count the exposed threads after the jam nut has
been tightened.
Armrest
Jam Nut
FIGURE 3 - ADJUSTING CAPTAIN'S SEAT ARMRESTS -
Socket Screw
Count Exposed Threads
ANGLE
6. Repeat STEPS 1-5 for opposite armrest, if neces-
sary.
Height (FIGURE 4)
1. Remove the socket screw that secures the armrest
to the seat frame assembly.
2. Adjust the armrest to one (1) of four (4) positions.
3. Reinstall the socket screw that secures the armrest
to the seat frame assembly and tighten securely.
Height
Adjustment
Holes
Seat Frame
Assembly
FIGURE 4 - ADJUSTING CAPTAIN'S SEAT ARMRESTS -
28
ARMS
Armrest
Socket Screw
HEIGHT