PROCEDURE 10
9. Install the battery box(es) into the wheelchair. Refer
9. Install the battery box(es) into the wheelchair. Refer
to INSTALLING/REMOVING BATTERY BOX(ES) in
to INSTALLING/REMOVING BATTERY BOX(ES) in
the PROCEDURE 11 - FWD MODELS or PROCE-
the PROCEDURE 11 - FWD MODELS or PROCE-
DURE 12 - MWD MODELS of this manual.
DURE 12 - MWD MODELS of this manual.
NOTE: New Battery(ies) MUST be fully charged BEFORE
NOTE: New Battery(ies) MUST be fully charged BEFORE
B
using, otherwise the life of the battery(ies) will be reduced.
using, otherwise the life of the battery(ies) will be reduced.
A
T
T
POSITIVE (+) Battery Terminal/Post
E
and Battery Clamp
R
Fuse Box placement
I
when box top
E
is installed
S
Positive (+) RED
Battery Cable
Fuse Box
Positive (+) RED
Battery Cable
Negative (-) BLACK
Battery Cable
Group 22NF Battery
NOTE: Battery clamps exploded away for clarification purposes only.
NEGATIVE (-) Battery
Terminal/Post
Tie-Wrap
Group 22NF Battery
CONNECTING BATTERY CABLE(S) TO BATTERY(IES) TERMINAL(S)/POST(S)
CONNECTING BATTERY CABLE(S) TO BATTERY(IES) TERMINAL(S)/POST(S)
RED Battery Clamp Cover
FIGURE 6 - CONNECTING BATTERY CABLES - BATTERY CLAMP METHOD
10. If necessary, charge the battery(ies). Refer to
10. If necessary, charge the battery(ies). Refer to
CHARGING BATTERIES in the PROCEDURE 11 -
CHARGING BATTERIES in the PROCEDURE 11 -
FWD MODELS or PROCEDURE 12 - MWD MOD-
FWD MODELS or PROCEDURE 12 - MWD MOD-
ELS of this manual.
ELS of this manual.
NEGATIVE (-) Battery Terminal/
Post and Battery Clamp
Negative (-) BLACK
Battery Cable
Group 22NF Battery
Hex Screw
Mounting Plate
Mounting Plate
Battery Clamp
POSITIVE (+) Battery
Terminal/Post
NEGATIVE (-) Battery Terminal/Post
DETAIL "B"
BLACK Battery Clamp Cover
46
BATTERIES
TOP VIEW
DETAIL "A"
EXPLODED
VIEW
POSITIVE (+) Battery
Terminal/Post
Tie-Wrap