Adjusting Captain’S Van Seat Armrests - Invacare Xterra GT Operating And Maintenance Manual

ARMS

ADJUSTING CAPTAIN’S VAN SEAT ARMRESTS

ANGLE (FIGURE 3)
1. Lift-up the armrest and loosen the jam
nut.
2. Adjust the mounting screw up or
down to the desired arm angle
position.
3. Tighten the jam nut.
4. Repeat STEPS 1-3 for opposite
armrest.
NOTE: To determine the same angle for the
opposite armrest, count the exposed threads
after the jam nut has been tightened.
HEIGHT (FIGURE 4)
1. Remove the mounting screw that
secures the armrest to the van seat
frame.
2. Adjust the armrest to one (1) of four
(4) positions.
3. Reinstall the mounting screw that
secures the armrest to the van seat
frame and tighten securely.
Part No. 1106627
Armrest
Jam Nut
Count Exposed Threads
FIGURE 3 - ADJUSTING CAPTAIN’S
VAN SEAT - ANGLE
Height
Adjustment
Holes
Van Seat
Frame
FIGURE 4 - ADJUSTING CAPTAIN’S
VAN SEAT - HEIGHT
39
SECTION 5
Mounting Screw
Mounting
Screw
Xterra™GT™